Showing posts with label Python. Show all posts
Showing posts with label Python. Show all posts
Monday, 3 February 2020

Install python and Paramiko on windows machine

›
We can follow below procedure to install Python on windows machine. Paramiko package is required for the ssh functionality wihtin the pytho...
Saturday, 25 January 2020

SSH accessibility check of multiple cisco router and save the output in a file

›
import paramiko import time import sys import logging import socket remote_conn_pre = paramiko.SSHClient() remote_conn_pre.set_missi...

SSH accessibility check on mulitple routers

›
Make a notepad contain IP address of the routers where we need to check the SSH accessibility. import paramiko import time import sys ...
Wednesday, 27 September 2017

Python for network engineer:- Configure multiple router using SSH :- Python2.7

›
import paramiko import time import sys import logging import socket remote_conn_pre = paramiko.SSHClient() remote_conn_pre.set_missi...
Saturday, 23 September 2017

Python for network engineer: cisco device backup using SSH : python2.7

›
Below script will take the backup of cisco devices in the folder where you have stored your python script. Please make sure ip.txt file(wh...
1 comment:
Friday, 22 September 2017

Python for network Engineer:- SSH to cisco router and run multiple commands :- python2.7

›
import paramiko import time #from getpass import getpass ssh = paramiko.SSHClient() ssh.set_missing_host_key_policy(paramiko.AutoAddPo...
Monday, 18 September 2017

How to remove rows with specific text from the notepad using python 2.7

›
Below script is used to remove specific text from notepad. Below script is used to  remove specific text from the notepad using python...

How to remove empty rows from notepad using Python 2.7

›
Below script is used to remove empty rows from notepad. #open the file in read mode which you need to modify, we  have used ip.txt fil...
Thursday, 14 September 2017

Python for network engineer :- RUN ping test to a destination from multiple routers using Python2.7

›
Below script is used to run ping test to a destination from all routers. e.g ip.txt must in same folder where you are storing you p...

Python for network engineer :- Cisco router config backup using Python2.7

›
Below script is used to take backup of multiple devices. Make sure when you call a file in python then that file must be stored in same ...

Python for network engineer :- Configure multiple router using telnet :-python 2.7

›
Below script is used to configure multiple devices. In below script ACL needs to be applied to multiple routers. Both Router IP and conf...

Python file modes

›
The modes are:  ‘ r ’ – Only to read a file. ‘ w ’ – Used to edit and write new information to the file. ‘ a ’ – Appending mode:- Use...
Wednesday, 13 September 2017

Python for network engineer:- Configure Cisco router using Python2.7

›
We tried to configure loopback0 on the router using python. Same script can be used to configure anything on the router. We just need to ad...

Python for network engineer :- SSH to Cisco router using Python2.7

›
Below script can be used to access the device using SSH and capture show ip int brief command output. import paramiko   #--<< impor...

Python for network engineer:- Telnet to Cisco router using Python

›
Below script can be used to telnet Cisco router using Python script and can capture show version output. import telnetlib #  --<<...
Tuesday, 12 September 2017

Errno 10060 - SSH paramiko error

›
Traceback (most recent call last):   File "D:python\SSH.py", line 3, in <module>     ssh.connect('192.168.1.100',...
3 comments:

How to install Paramiko - Python

›
Make sure machine have direct internet access. 1. Go to Python27 folder. C:\>cd Python27 C:\Python27>dir  Volume in drive C is...
Saturday, 24 June 2017

Python Basic example - Class - Python 3.6

›
#Defining Class to total of two variables class total:  def setvar(self,x,y):  #defining member functions to get variable from user    ...

Python basic example - To find Maximum number out of three

›
x = int (input("Enter the value of x:- ")) y = int (input("Enter the value of y:- ")) z = int (input("Enter the...