Before configuring the mobility between the two controllers,
please make sure that both the WLC’s are able to ping each other.
Step 1. Click on the Controller Tab from the main menu and
from the left hand side menu click on Mobility Group.
Step 2. Click on New at the right hand side of the screen to
create a new Mobility group.
Step 3. Enter the IP address of WLC with which the mobility
is to be created and also enter the MAC address of the management interface of
the WLC.
Note: The Group name has
to same on both the WLCs in order to establish
the mobility between the both.
Click Apply.
The mobility group
once configured and applied will take some time to come up. Initially it shows
the control and data path down. Later both Control and data path comes up. The
mobility is said UP once both control and data paths are up.
No comments:
Post a Comment