Configure SSID with Mac filtering Cisco WLC

Step 1. Go to CONTROLLER - > INTERRFACE -> NEW to create new interface.

Step 2. Give the interface name and Vlan id and press APPLY.

Step 3. Provide the IP address/Net mask/Gateway to the interface. Also enter the VLAN id to which the SSID traffic will be mapped.

Map the logical interface to the physical port of the WLC.

DHCP server setting: - Enter WLC’s own address when the DHCP scope is created on WLC itself otherwise adds external DHCP server IP addresses.

Step 4. Press APPLY to apply the interface settings. You will get the below warning which says that it can impact the connectivity to the SSID. Hence we should not change the interface setting during production hours.

Step 5. Once you press OK, you will get the list of interface created so far.

Step 6. Go to WLAN ->wlan -> From the scroll Tab on right side plan, select CREATE NEW and press GO.

Step 7 Enter Profile name and SSID name and select the unique ID and press APPLY.

Step 8 Click the SSID ID to configure the other parameter of the SSID.

Select the interface and radio policy for the SSID.

Step 9 Go to Security -> Layer 2 security and choose none and select the mac filtering option.

               
Step 10. Go to Security ->Mac filtering and click New.

Step 11 Enter the mac address of the user machine and choose the appropriate profile and interface. Press APPLY to add the mac address.

Step 12. We see the list of mac address.

Step 13. You can delete the mac entry by clicking the blue button and then please Remove.

Step 14. Enable the SSID, once the configuration is done.

Step 15  Go to WLAN - > WLANS and check the status of the SSID.